Turf Reinforcement Mesh

Turf Reinforcement Mesh

TurfProtecta turf reinforcement mesh

Application Function

Ground Stabilisation

Market Sectors

Grass and Ground

TurfProtecta® turf reinforcement mesh is an extruded black or green, lightweight plastic mesh for grass reinforcement and protection where occasional light vehicle or pedestrian use is required for applications including car parking, access routes and aircraft taxiways. Supplied in 2m x 30m rolls and in two grades, ‘Standard’ and ‘Heavy’ as determined by the application, TurfProtecta® turf reinforcement mesh is ideal for reinforcing grassed surfaces prone to wear, rutting and smearing which can result a muddy surface incapable of being used.

  • Infrequent overflow grass car parks
  • Grass access routes
  • Pedestrianised grassed areas
  • Grass footpaths
  • Wheelchair / Disabled (DDA) access routes
  • Front lawn parking

TurfProtecta® grass reinforcement net is manufactured from 100% recycled high density polyethylene, the mesh is UV stabilised and simple to install; after cutting the grass short, the TurfProtecta® turf reinforcement mesh is unrolled and pinned to the surface using metal U-Pins or plastic pegs. By allowing plants to grow through the plastic mesh apertures, the grass sward intertwines with the plastic mesh filaments creating a strong, discreetly reinforced surface, limiting damage and reducing soil compaction. It is advisable to allow the grass to fully establish before the area is used to create a stronger reinforced surface (this may take only a few weeks to a few months depending on the grass growing season).

It is strongly recommended that installation be carried out during the growing season to allow a strong interlock between the TurfProtecta® mesh and the grass roots. The grass will grow through the reinforcement mesh, creating a natural reinforced and stabilised grassed surface capable of applications including car parks and grass access routes.

After a few months of the growing season, the grass roots will have intertwined with the mesh filaments creating a strong stable surface capable of withstanding heavy pedestrian and occasional vehicular use. The grass can be cut as normal and will have regained its natural appearance. The grass can however be mown, rolled and fertilised as usual during this period.

TurfProtecta® grass reinforcement mesh can be installed onto existing grassed surfaces or newly landscaped areas (Laid on top of a level, well drained, seeded soil, pinned and then covered with a layer of topsoil and seed), for both permanent or temporary applications. Turfprotecta® is the perfect ground reinforcement mesh for grassed areas prone to becoming muddy and rutted in wet conditions.

Product Specification :

SizeGradeColourMesh ApertureWeightMaterialRecycledPart No.

Fixing Pins and Pegs

Steel U-Pins or plastic pegs should be used to secure TurfProtecta® to the ground. Please download the design specification for details on the recommended amount of pins per roll.

Plastic Pegs and Markers /  U-PinsPlastic Pegs and Markers / U-Pins

ProductMaterialSizeOuterPart Number
U-PinsSteel170mm x 70mm x 6mm dia.50 pack041824
Black PegsPlastic140mm long100 pack060351

Looking for a distributor? 

The stockists shown on the right can supply locally or supply smaller quantities than Terram can supply direct. For large orders and projects please contact us directly or one of our distributors.

Groundtrax - Trade Sales

Green-Tech - Trade and online sales

Ultimate One Ltd - Domestic, Small & large quantities available to buy online. 


TERRAM Ground Reinforcement Solutions
TURFPROTECTA Installation Guide
TURFPROTECTA Reinforcement of grass recreation area (Tenterten, Kent)
TURFPROTECTA Reinforcement of turfed access areas (Suffolk)
Grass & Ground Reinforcement