How do you install and join a Geocomposite?
TERRAM Geocomposites are manufactured in rolls varying from 2 to 4 wide and up to 100m long so are generally installed using mechanical lifting equipment for large areas, smaller rolls or sheets cut from larger rolls can be installed manually. When being used for back of wall drainage the Geocomposites can be held temporarily in place with a variety of fixings prior to backfilling with soil fill. For horizontal applications care must be taken to ensure the ground is flat or has a constant fall with no lumps or undulations to prevent ponding. All TERRAM Geocomposites are supplied with overlap edges which allow butt jointing and can be stapled or taped depending on the site conditions.